A successful gate installation begins with a system suited to its surroundings. The available space, entrance width, gate construction, and operating demands all influence the choice of hardware. Al Amal brings together a comprehensive range of gate solutions to address these requirements, covering telescopic, classical sliding, 90° curved sliding, bi-folding, cantilever, swing, sliding-folding, Guardian, and pedestrian systems.
Our range accommodates everything from conventional entrances to layouts requiring compact movement, folding sections, or a change in the gate’s direction of travel. We assist customers in selecting compatible hardware with consideration for gate dimensions, weight, support arrangements, and frequency of use.
Drawing on our architectural hardware experience since 1992, we support informed product selection and practical project coordination. Our aim is to help customers achieve a complete gate arrangement in which movement, stability, security, and appearance work together.
90° Curve Sliding Gate System
A restricted boundary need not prevent the use of a sliding entrance. The 90° curve sliding gate system allows connected gate sections to follow a curved track and continue along an adjoining boundary, accommodating layouts where a conventional straight sliding gate cannot retract fully.
Its movement relies on the coordinated action of articulated sections, suitable hinges and specialised rolling components. As the gate opens, the sections negotiate the bend progressively, allowing the entrance to clear while the gate follows the available perimeter.
Al Amal Company offers hardware solutions for this arrangement, with selection guided by the opening width, corner radius, panel dimensions and gate weight. Particularly useful for compact residential plots and constrained commercial entrances, the system provides an adaptable approach to access planning while retaining the appearance and function of a sliding gate.
Telescopic Sliding Gate System
A wide entrance does not always offer enough space for a conventional sliding gate. Telescopic sliding systems address this challenge through two or more interconnected leaves that travel along parallel paths and overlap when opened. This arrangement reduces the lateral storage space required, making it particularly useful for properties with restricted boundaries or limited driveway frontage.
Al Amal Company offers hardware solutions for coordinated telescopic gate movement, including rolling, guiding and synchronisation components. Each configuration is selected around the opening width, leaf dimensions, gate weight and available space beside the entrance.
Suitable for residential developments, commercial premises and industrial facilities, telescopic systems combine efficient use of space with an orderly, contemporary appearance. They provide a practical way to accommodate wider access where a single sliding leaf would be difficult to install.
Cantilever Sliding Gate System
Cantilever gate systems provide sliding access without installing a track across the entrance. Roller carriages anchored beside the opening engage with a guide channel attached to the gate, supporting the structure as it travels above the driveway.
By removing the ground track from the traffic route, this arrangement avoids a rail that could otherwise collect sand, gravel or debris. It is a practical option for industrial premises, commercial compounds and residential entrances where an uninterrupted driveway surface is desirable.
Al Amal Company supplies cantilever hardware including roller carriages, guide channels, upper guides, end wheels, catchers and mounting accessories. Selection considers the opening width, gate weight, support spacing, foundations and space required for the gate’s extended rear section. A properly matched configuration provides stable guidance and a clear entrance suited to the demands of the property.
Bi-Folding Swing Gate System
Bi-folding gate systems offer a practical solution where the depth available for a traditional swing gate is restricted. Each folding assembly comprises two connected panels that fold towards one another during opening, reducing their projection into the property.
The movement is coordinated through purpose-designed hinges and linkage or transmission components, according to the selected system. This controlled folding action makes the arrangement useful for shorter driveways and entrances where parking areas, buildings or circulation routes limit the available swing space.
Al Amal Company provides hardware solutions for bi-folding installations, selected to suit panel dimensions, gate weight, opening angle and mounting conditions. Suitable for both contemporary residential entrances and commercial properties, these systems bring together compact movement, a clear entrance and flexibility in gate design.
Classical Sliding Gate System
Classical sliding gate systems offer a straightforward approach to controlling vehicle access. The gate moves horizontally on wheels running along a ground-mounted track, while upper guides maintain its alignment. Because the leaf travels beside the entrance, the system avoids the opening arc required by a swing gate and preserves usable space within the driveway.
Al Amal Company supplies the essential hardware for these installations, including gate wheels, tracks, guide rollers, stops, catchers and locking accessories. Component selection takes account of the gate’s weight, dimensions and operating requirements to establish a well-supported, consistent sliding movement.
This arrangement suits properties with sufficient clear space beside the opening to accommodate the gate leaf. From private driveways to warehouse entrances, classical sliding systems provide a practical foundation for manual operation or integration with compatible automation.
Overhead Hanging Sliding Gate System
Hanging sliding systems carry the weight of the gate or door through an overhead track and trolley assembly. Guide components stabilise the lower section, allowing the panel to move laterally without relying on a continuous load-bearing rail across the floor.
This arrangement is particularly useful where a ground track would interfere with floor use, drainage or the movement of equipment. It is well suited to warehouses, workshops and commercial service areas with a suitable overhead supporting structure.
Al Amal Company offers tracks, trolleys, guides, stops and associated fittings for different panel sizes and operating requirements. Selection considers the panel weight, available headroom, supporting structure and space needed beside the opening. With these elements coordinated, a hanging sliding system provides an organised, practical entrance while maintaining a clear floor area beneath the moving panel.
Sliding-Folding Hanging Gate System
Sliding-folding systems divide an opening into several hinged panels that move along a guide track and fold together as the entrance opens. Depending on the configuration, the panels can stack to one side or divide into groups that open towards opposite sides.
This arrangement is useful for workshops, warehouses, service buildings and other premises requiring broad access without storing a full-width sliding leaf alongside the opening. It also offers flexibility in how the panels are positioned when open, helping the entrance work with the surrounding building layout.
Al Amal Company supplies associated hardware such as tracks, trolleys, hinges, pivots, stops, bolts and locking components. Panel quantity, support arrangements, headroom and stacking space are considered together when selecting the system. The result is a practical approach to larger openings that balances access requirements with efficient use of the available space.
Swing Gate System
Swing gate systems combine a familiar opening movement with considerable architectural flexibility. Available in single- or double-leaf arrangements, the gate rotates around hinges or pivots secured to supporting posts or pillars. This makes the system suitable for both traditional entrance designs and clean, contemporary metalwork.
Al Amal Company offers hardware for supporting, guiding and securing swing gates, including hinges, pivot assemblies, stops, bolts, locks and handles. Components are selected according to the leaf weight, width, mounting arrangement and intended frequency of use.
Swing gates are particularly appropriate where adequate clearance is available for the opening arc. Ground levels, wind exposure and the position of nearby vehicles or structures also influence the configuration. With the right hardware and layout, the system provides an attractive, functional entrance for residential, commercial and industrial properties.
Guardian Cantilever Gate System
The Guardian gate system provides cantilever-style operation through a different structural and hardware arrangement. In place of the conventional proprietary cantilever rail, it uses a standard tubular section working with specialised carriage assemblies to support and guide the gate.
This approach retains the principal benefit of cantilever access: a sliding gate that crosses the entrance without a track on the roadway. It also addresses practical considerations in fabrication and supply, helping reduce the bulk associated with transporting conventional rail components.
Al Amal Company offers Guardian system hardware for projects seeking an alternative to traditional cantilever construction. Selection is based on the opening dimensions, gate weight, structural requirements and installation layout. For suitable commercial and industrial entrances, Guardian brings together clear access, coordinated movement and a practical approach to component handling and maintenance.
Pedestrian Gate System
Pedestrian gate systems create a dedicated access point for residents, visitors and staff without requiring the main vehicle gate to open. They help organise movement through the property and allow everyday entry to be managed independently of vehicle traffic.
Al Amal Company offers hardware solutions for pedestrian gates, including hinges, latches, locks, handles and suitable closing devices. These components are selected around the gate’s material, dimensions, weight and expected use, with attention to comfortable operation and consistent closure.
From private gardens and villa entrances to commercial premises and shared residential spaces, pedestrian gates can be configured to suit the character and access requirements of the site. Where controlled entry is required, compatible locking and access-control hardware can be incorporated as part of the design, creating a coordinated entrance that combines convenience with appropriate security.
